Difficulty
Easy
Steps
4
Time Required
00:10:00
Ce tutoriel a été créé par la communauté
User contributed
Introduction
Vehicle engine 1.4 HDi 70 hp
Parts
-
-
To access the cylinder, you must first remove the rear shelf.
-
Unhook the loops of the two retaining ropes
-
Remove the two rear shelf tabs from the notches in the upper part of the tailgate.
-
-
-
Secure the top of the tailgate with a broom. This item is very heavy. -
Using a flat screwdriver, remove the retaining clip at the top of the cylinder.
-
Using a flat screwdriver, remove the retaining clips at the bottom of the cylinder.
-
-
-
Compare the dimensions of the old and new cylinders.
-
Clean the jack fasteners with a cloth and grease the jack fasteners.
-
Push the hollow end of the jack onto the ball joint of the clip until you hear a "click" of the clip locking.
-
-
-
In the same way as the previous step, push the other hollow end of the jack onto the ball joint of the clip until you hear a "click" of the clip locking.
-
Replace the rear shelf.
-
Cancel: I did not complete this guide.
3 other people completed this guide.
