Changing the tail light bulbs on a Citroen Nemo

First, open the trunk (or the rear hinged doors if Nemo is the utility version)

Help a crosshead screwdriver unscrew the two screws, from the inside. For the left rear light, they are to the right of the light, for the right rear light, they are to the left of the light

Facing the fire, pull the fire towards you to unclip it.

Press on each side of the connector to dislodge it from the light, and pull.

The fire is now free, be careful not to drop it.

Using your fingers, release the plate by spreading each tab towards the outside of the light. There are 7 in total.

To release the bulb, turn it on itself while applying pressure. Models ofampoules : From top to bottom:

Brake lights Type b, p21w - 21w

Direction indicators Type b, py21w - 21w amber

Reversing lights Type b, p21w - 21w

Position lights / fog lights Type b, p4/21w - 4w/21w

After reclipping the bulb holder onto the rear light, reconnect the plug to the light.

Present the fire and press the fire to make the nipples fit into the red slots in the photo

Screw the two screws back in (green in the photo), and you're done!