Video Overview
-
-
Disconnect the air filter intake duct
-
Unscrew the two bolts located on both sides of the air filter box
-
Remove the air filter box
-
Protect the intake hole with un chiffon
-
Remove the anti-parasite
-
Clean with a blower
-
-
-
To loosen les bougies with the spark plug wrench then with the tube
-
Compare old and new spark plugs (thread, size, electrodes, ...)
-
Lubricate the spark plug thread with the oil dipstick
-
Screw the spark plug back in with the tube then with the key
-
Repeat the same operation for the 4 spark plugs
-
Always remove the 4 spark plugs one after the other.
-
-
-
Reconnect the air sleeve to the throttle body
-
Be sure to reconnect the oil breather hose under the air box.
-
Reclip the hose
-
Tighten the 2 bolts on each side of the air box
-
Replace the air box clips
-
Perform a start-up test
-
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
2 Comments
Hello, I changed the 4 spark plugs on my Fiat Panda. The spark plugs were taken from you.
I changed the timing belt, tensioner, front brake pads, air filter, oil filter. The car runs very well. But on the dashboard the engine light is still on. Can you help me, thank you.
ANTOINE INCHAURTIETA - Resolved on Release Reply
