Skip to main content

Tools

No tools specified.

  1. 
Raise the arm

Tilt the broom at a right angle

Hold the broom arm firmly and with the other hand unclip the broom from the arm by pushing
    • Raise the arm

    • Tilt the broom at a right angle

    • Hold the broom arm firmly and with the other hand unclip the broom from the arm by pushing

  2. 
Compare the new broom and the old one before reassembly
  3. 
Insert the new brush into the notch in the brush arm

Hold the broom arm firmly and with the other hand clip the broom into its housing.

Carefully place the wiper blade and arm back on the rear window.
    • Insert the new brush into the notch in the brush arm

    • Hold the broom arm firmly and with the other hand clip the broom into its housing.

    • Carefully place the wiper blade and arm back on the rear window.

Finish Line

richard PAUL

Member since: 10/17/2016

101 Reputation

1 Guide authored

One Comment

Good morning,

You know how to change the rear wiper blade on a 5008 phase 2 because the wiper arm does not pivot. I have not found anything on this subject on the internet.

THANKS

wilpat77 - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 9

Past 30 Days: 35

All Time: 2,988