Difficulty
Very easy
Steps
3
Time Required
00:05:00
Ce tutoriel a été créé par la communauté
User contributed
Introduction
We are going to replace the rear wiper blade of a Fiorino.
For this you of course need a new wiper blade for Fiat Fiorino. The one used on my car measures 37cm or 15 inches (model H371).
No tools are required, just a little elbow grease.
Tools
No tools specified.
Parts
-
-
A wiper blade wears out over time, and needs to be replaced every year or so.
-
-
-
First of all, you obviously have to unfold the metal rod supporting the broom.
-
Then, orient the broom at a right angle with this same rod (see photo).
-
The assembly is made possible by a bar that hooks into a hole (see photo: GREEN MARK/CIRCLE). To remove the brush, you must unhook the bar.
-
-
-
The photo is clear enough to show you that there is a notch (or hole) on the metal rod, and that this hole is designed to fit with the small bar (see photo: green arrow) present in the new wiper blade.
-
You simply have to fit the 2 elements together.
-
Finally, ensure that the assembly is correctly aligned, particularly the arm with the wiper (see photo: green parallel lines) to ensure that everything is securely attached and that it will stay in place when the windshield wiper is activated.
-
Well done! You have brilliantly completed this simple but essential tutorial for good rear visibility in rainy weather.
You can drive with full visibility.
If you have successfully completed this tutorial, please click on the "You have succeeded..." button!
Well done! You have brilliantly completed this simple but essential tutorial for good rear visibility in rainy weather.
You can drive with full visibility.
If you have successfully completed this tutorial, please click on the "You have succeeded..." button!
