Tools
Video Overview
-
-
Open both trunk flaps.
-
The fixing nut is located inside the trunk.
-
Use a 10 socket wrench to loosen the nut.
-
-
-
From the outside, carefully pull the light to unclip it from the wing.
-
Raise the lower trunk flap slightly to release the light from the flap retaining cable.
-
Disconnect the light connector.
-
-
-
Pinch the tabs on the lamp holder to release it.
-
Do not touch the lamp glass with your fingers.
-
Replace the defective lamp. To remove a lamp, turn it 1/4 turn. The lamp type is indicated on the back of the lamp holder.
-
When refitting, make sure to position the bulb holder correctly on the light, then the latter on the wing and check that it is working.
-
Cancel: I did not complete this guide.
8 other people completed this guide.
