Introduction
Vehicle engine 1.4 HDi 70 hp
-
-
Raise and chock the rear of the vehicle. Remove the wheels to gain access to the braking system.
-
-
-
-
In the vehicle, release the handbrake lever.
-
On the rear wheel, pull the handbrake cable to remove it to make it easier to change the brake pads.
-
-
-
The brake caliper has two fixing screws.
-
Using a 13mm socket and 15mm wrench, remove the top screw.
-
-
-
Remove the two screws supporting the caliper.
-
Remove the caliper and use tensioners to support it without damaging the hose.
-
-
-
Before installing the pads, clean the supports with a wire brush.
-
Use a piston pusher to push the piston away from the caliper.
-
Place the new brake pads.
-
-
-
Replace the brake caliper.
-
Use the new fixing screws with thread lock.
-
-
-
Tighten the caliper screws and reattach the handbrake cable.
-
Press the brake pedal several times until it becomes hard.
-
Check the brake fluid level.
-
Cancel: I did not complete this guide.
3 other people completed this guide.
