Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

Changing the rear brake bulb on a Peugeot Boxer

Written By: VINCENT DELANOE (and one other contributor)
  • Comments: 0
  • Favorites: 0
  • Completions: 1

Difficulty

Easy

Steps

4

Time Required

00:15:00

Sections

1

Flags

1

Ce tutoriel a été créé par la communauté

Ce tutoriel a été créé par la communauté

User contributed

Introduction

Describe what you are going to do.

  1. Remove the tail light by unscrewing the two Phillips screws Remove the tail light by unscrewing the two Phillips screws Remove the tail light by unscrewing the two Phillips screws

    • Remove the tail light by unscrewing the two Phillips screws

    Edit

  2. Slide a screwdriver behind the connector clip then pull the connector to disconnect it. Slide a screwdriver behind the connector clip then pull the connector to disconnect it. Slide a screwdriver behind the connector clip then pull the connector to disconnect it.

    • Slide a screwdriver behind the connector clip then pull the connector to disconnect it.

    Edit

  3. Unscrew the two crosshead screws to remove the plate Unscrew the two crosshead screws to remove the plate Unscrew the two crosshead screws to remove the plate

    • Unscrew the two crosshead screws to remove the plate

    Edit

  4. Replace the faulty bulb with a P21W. Compare the two bulbs and replace the new bulb.

    • Replace the faulty bulb with a P21W.

    • Compare the two bulbs and replace the new bulb.

    • Reassembly is carried out by following the steps in reverse order.

    Edit
Finish Line

One other person completed this guide.

Author

with 1 other contributor

VINCENT DELANOE

Member since: 02/17/2018

133 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 21

All Time: 2,817

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.