Skip to main content

Introduction

Vehicle engine 1.4 e 75 hp

  1. 
The light bulbs are located above the license plate.

Open the trunk for better access. Set the headlight control to zero.
    • The light bulbs are located above the license plate.

    • Open the trunk for better access. Set the headlight control to zero.

  2. 
Locate the small holes on either side of the plastic shell.

Place a thin screwdriver in a hole and press lightly while moving it outwards.

Place a thin screwdriver in a hole and press lightly while moving it outwards.
    • Locate the small holes on either side of the plastic shell.

    • Place a thin screwdriver in a hole and press lightly while moving it outwards.

  3. 
Remove the plastic cover

Grasp the bulb and remove it

Grasp the bulb and remove it
    • Remove the plastic cover

    • Grasp the bulb and remove it

  4. 
Compare bulbs
    • Compare bulbs

  5. 
Identify the horizontal direction for inserting the bulb base

Insert the new bulb

Insert the new bulb
    • Identify the horizontal direction for inserting the bulb base

    • Insert the new bulb

  6. 
Replace the protection correctly

Check for proper operation
    • Replace the protection correctly

    • Check for proper operation

Finish Line

11 other people completed this guide.

hemissi-nizar

Member since: 01/16/2017

21,057 Reputation

88 Guides authored

4 Comments

very good tutorial. Great

fredericpaget - Reply

Too bad we tried before seeing the tutorial, so one of them is completely broken

JONATHAN DESEVAUX - Reply

Thank you very much. It is very well explained.

Satha PHOUN - Reply

Nickel!

This allows you to remove the cover without breaking it.

thierrybounne - Reply

Add Comment

View Statistics:

Past 24 Hours: 13

Past 7 Days: 30

Past 30 Days: 160

All Time: 49,778