Skip to main content

Introduction

Vehicle engine 1.4 HDi 70 hp

  1. 
The license plate light bulbs are located on the upper tailgate flap. On either side of the opening button.

Open the trunk for better access. Set the headlight control to zero.

Open the trunk for better access. Set the headlight control to zero.
    • The license plate light bulbs are located on the upper tailgate flap. On either side of the opening button.

    • Open the trunk for better access. Set the headlight control to zero.

  2. 
Start by removing the protective cover, locate the small notch.

Insert a flathead screwdriver into this notch.

Use the screwdriver to gently pry up the transparent cover.
    • Start by removing the protective cover, locate the small notch.

    • Insert a flathead screwdriver into this notch.

    • Use the screwdriver to gently pry up the transparent cover.

  3. 
Remove the plastic cover to access the bulb.

Grasp the bulb with your fingers and pull outward to dislodge it from its holder.

Grasp the bulb with your fingers and pull outward to dislodge it from its holder.
    • Remove the plastic cover to access the bulb.

    • Grasp the bulb with your fingers and pull outward to dislodge it from its holder.

  4. 
Compare bulbs. The type of this lamp is W5W 12V.
    • Compare bulbs. The type of this lamp is W5W 12V.

  5. 
Identify the orientation of the connectors before replacing the lamp.

Insert the new bulb until it stops.

Insert the new bulb until it stops.
    • Identify the orientation of the connectors before replacing the lamp.

    • Insert the new bulb until it stops.

  6. 
Replace the protective cover.

Check for proper operation.
    • Replace the protective cover.

    • Check for proper operation.

Finish Line

One other person completed this guide.

hemissi-nizar

Member since: 01/16/2017

21,057 Reputation

88 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 6

Past 30 Days: 43

All Time: 6,616