Difficulty
Easy
Steps
9
Time Required
00:30:00
Request Guide Deletion
This guide will be reviewed by admins for deletion.
Ce tutoriel a été créé par la communauté
User contributed
Introduction
Here's how to change the ignition coil on an A112
Parts
-
-
Use a 10mm socket with a flexible tip to remove both fasteners.
-
-
-
Disconnect the connector using an 8mm socket.
-
Compare the two ignition coils. (The black part of the coil may "spin" if it is defective)
-
-
-
Insert the fixing paste between the bolt and the washer.
-
Tighten the two mounting bolts with a 10mm socket.
-
-
-
Position the green connector on the lower fixing.
-
Connect the two connectors to their fixing brackets
-
Black = LOW
-
Vert=HAUT
-
Cancel: I did not complete this guide.
One other person completed this guide.
