Changing the hood struts on RCZ

Pull the handle to unlock the hood.

There is a jack on each side.

Locate the fasteners.

Use a small flat screwdriver to leverage.

Unclip the blurring tool.

Repeat the operation at the top.

Remember to secure the hood with brooms or a friend.

Pull towards you to disengage the jack.

Check the correspondence between the old and the new trunk cylinder (length, attachments).

Fit the jack into its support until it clicks and clip the flouxeur.

Do not make a mistake about the direction (sheath facing upwards)

Perform a test, then do the same for the second cylinder.