Skip to main content

Video Overview

  1. 
Remove the air intake

To remove the exhaust pipe, unscrew the 10 bolt with the ratchet then remove the two clips

Unscrew and unclip the cover where it is located glow plugs
    • Remove the air intake

    • To remove the exhaust pipe, unscrew the 10 bolt with the ratchet then remove the two clips

    • Unscrew and unclip the cover where it is located glow plugs

    • Remove the engine cover bracket

  2. 
Disconnect the four spark plugs by pulling upwards

Clean the spark plug wells using a blower
    • Disconnect the four spark plugs by pulling upwards

    • Clean the spark plug wells using a blower

    • Carefully loosen the spark plugs and then remove them.

  3. 
Check the correspondence between the new and old spark plugs (electrodes, size, thread, connectors)
    • Check the correspondence between the new and old spark plugs (electrodes, size, thread, connectors)

  4. 
Screw the 4 spark plugs back in

Replace the 4 connections

Replace the cover
    • Screw the 4 spark plugs back in

    • Replace the 4 connections

    • Replace the cover

    • Reattach the cache support

    • Replace the exhaust pipe

    • Reinstall the air intake

    • Replace the last cover

    • To check, start the engine.

Finish Line

9 other people completed this guide.

thibaut.ansaldi

Member since: 11/23/2014

83,984 Reputation

196 Guides authored

Team

Oscaro Team Member of Oscaro Team

4 Members

101 Guides authored

7 Comments

I was about to go to the garage, I think I'll go for it

plp77510 - Reply

Hello, it is better to leave the locking clips partially mounted on the hose in order to avoid losing them during reassembly (it is complicated to access the end of the hose to reassemble the clip blindly)

clement blot - Reply

Hello, I have a problem, when I drive the car in 2nd or 3rd gear the car has more power, it seems like it chokes at times on a Clio 3, could you give me some information and give me some advice.

franck Denizart - Reply

Good morning,

It would also be necessary to specify the tightening torque to be respected for the spark plugs, because overtightening them: it is guaranteed to break...

Cdt

Cédric RASSAT - Reply

Good morning,

Here is the link: https://pieces-auto.oscaro.com/faisceau-...

Yours sincerely,

The Oscaro Team

thibaut.ansaldi - Reply

Add Comment

View Statistics:

Past 24 Hours: 14

Past 7 Days: 95

Past 30 Days: 521

All Time: 37,571