Skip to main content
  1. Using the flat screwdriver, remove the cover at the base of the wiper arm. Then open your hood.
    • Using the flat screwdriver, remove the cover at the base of the wiper arm.

    • Then open your hood.

  2. Open your hood completely and lock it using the metal arm. Unscrew the nut at the base of the wiper arm.
    • Open your hood completely and lock it using the metal arm.

    • Unscrew the nut at the base of the wiper arm.

  3. Close the hood Unfold the wiper arm to release the wiper base and make it easier to remove. Remove the windshield wiper, it may be necessary to reopen the hood to complete its extraction but this should not be mandatory
    • Close the hood

    • Unfold the wiper arm to release the wiper base and make it easier to remove.

    • Remove the windshield wiper, it may be necessary to reopen the hood to complete its extraction but this should not be mandatory

  4. To reassemble the arm, follow the steps in reverse order.
    • To reassemble the arm, follow the steps in reverse order.

    • Install your wipers where they were originally.

    • Once the nut is tightened. Rotate the wipers to check that they are not touching each other and that they are not touching the bodywork.

    • Add some wiper fluid, adding fluid tends to make the wiper arms travel a little further than dry.

    • If necessary, repeat the disassembly and adjust the position of the arms.

Finish Line

fabb

Member since: 08/09/2017

352 Reputation

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 14

All Time: 241