Introduction
Vehicle engine 1.4 HDi 70 hp
-
-
Raise and chock the front of the vehicle. Remove the front wheels.
-
-
-
-
To remove the brake caliper, unscrew the lower fixing screw with a 13 mm wrench.
-
As well as the upper fixing screw.
-
-
-
Remove the caliper from its support and hang it with bungee cords to avoid damaging the hoses.
-
-
-
Remove the brake pads.
-
Remove the 4 brake pad holders if they are supplied with the new ones or clean them with a wire brush.
-
-
-
Open the brake fluid reservoir cap in the engine compartment.
-
Use a piston pusher to be able to put the caliper on the new brake pads.
-
Don't forget to close the fuel cap.
-
-
-
Install the brake pad holders.
-
Install the brake pads one after the other.
-
-
-
Replace the brake caliper .
-
Use the new fixing screws or apply thread lock to the original ones.
-
-
-
Press the brake pedal repeatedly until it stiffens before driving the vehicle.
-
Cancel: I did not complete this guide.
4 other people completed this guide.
