Skip to main content

Introduction

Vehicle engine 1.6 HDi FAP 16V 110 hp

Malfunction of this switch may cause the cruise control to be deactivated unexpectedly while the vehicle is being driven.

  1. It is located above the pedal assembly, in contact with the brake pedal. It is located above the pedal assembly, in contact with the brake pedal.
    • It is located above the pedal assembly, in contact with the brake pedal.

  2. Hold the switch with your hand and turn it 1/4 turn to unlock it from its support. By pressing the green tab, disconnect it.
    • Hold the switch with your hand and turn it 1/4 turn to unlock it from its support.

    • By pressing the green tab, disconnect it.

  3. Compare dimensions. The length is adjusted by pressing the head of the switch to move down the notches one by one.
    • Compare dimensions.

    • The length is adjusted by pressing the head of the switch to move down the notches one by one.

    • Take the old as a model without ever being shorter.

  4. Connect the switch to its plug. Insert the switch into its support and lock it with a 1/4 turn.
    • Connect the switch to its plug.

    • Insert the switch into its support and lock it with a 1/4 turn.

    • Check for proper operation.

Finish Line

8 other people completed this guide.

hemissi-nizar

Member since: 01/16/2017

21,003 Reputation

88 Guides authored

2 Comments

What is the little red cursor that can turn a quarter turn for?

hieubox - Reply

Hello everyone,

I have just changed the brake switch on my Peugeot, as indicated here.

Problem, when I press the brake, the lights go out and conversely, they stay on when the brake is released.

How to solve this problem?

Thanks in advance for your answers!

vincent.helie.62 - Reply

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 24

Past 30 Days: 138

All Time: 17,918