Skip to main content

Introduction

Vehicle engine 1.4 HDi 70 hp

Malfunction of this switch may cause the cruise control to be deactivated unexpectedly while the vehicle is being driven.

  1. It is located above the pedal assembly, in contact with the brake pedal. It is located above the pedal assembly, in contact with the brake pedal.
    • It is located above the pedal assembly, in contact with the brake pedal.

  2. Hold the switch with your hand and turn it 1/4 turn to unlock it from its support. By pressing the green tab, disconnect it.
    • Hold the switch with your hand and turn it 1/4 turn to unlock it from its support.

    • By pressing the green tab, disconnect it.

  3. Compare dimensions. The length is adjusted by pressing the head of the switch to move down the notches one by one.
    • Compare dimensions.

    • The length is adjusted by pressing the head of the switch to move down the notches one by one.

    • Take the old as a model without ever being shorter.

  4. Connect the switch to its plug. Insert the switch into its support and lock it with a 1/4 turn.
    • Connect the switch to its plug.

    • Insert the switch into its support and lock it with a 1/4 turn.

    • Check for proper operation.

Finish Line

5 other people completed this guide.

hemissi-nizar

Member since: 01/16/2017

21,057 Reputation

88 Guides authored

2 Comments

Nickel, my problem was on a C5, the switch model is a little different but the quarter turn method is also the right one!

THANKS.

jpbarastier - Reply

Thanks for this tutorial!

in 5 minutes it was done!

Stéphane Roquet - Reply

Add Comment

View Statistics:

Past 24 Hours: 12

Past 7 Days: 50

Past 30 Days: 156

All Time: 16,397