Introduction
First of all, remember to turn off the engine and remove the keys from the ignition.
Video Overview
-
-
View Battery
-
Using the cliquet and from the 10 socket loosen the negative terminal (black wire), then the positive terminal (red wire)
-
Protect the pods with rags
-
-
-
Locate the screw on the battery retaining flange
-
Using the ratchet, the extension, and the TORX T30 socket, unscrew then remove the screw and the retaining flange
-
Remove the battery
-
-
-
Compare the electrical characteristics of batteries
-
Rest of la nouvelle batterie
-
Remove the protective caps from the terminals
-
-
-
Reposition the retaining flange and the torx screw
-
Connect the battery, starting with the negative pole (black wire)
-
Please make sure to tighten the terminals properly.
-
Cancel: I did not complete this guide.
6 other people completed this guide.
Team
4 Comments
and that doesn't reset the counter for the next oil change?
berguillermo - Resolved on Release Reply
Fix to the procedure described in the video:
- first disconnect the negative terminal
-then disconnect the positive terminal
Reconnecting the terminals:
-start by reconnecting the positive terminal (the key can touch a metal part, no electric arc)
-end with the negative terminal
Guy LETERTRE - Resolved on Release Reply
