Difficulty
Easy
Steps
3
Time Required
00:20:00
Ce tutoriel a été créé par la communauté
User contributed
-
-
Using a 10 mm flat wrench, loosen the 2 nuts holding the additional brake light in place.
-
-
-
Push the 2 pins of the additional brake light upwards if the brake light shows resistance due to the fact that the seal is sticking to the bodywork, then you need to use a flat screwdriver with a cloth. Leverage around the edge of it to be able to detach it and then push the 2 pins once the seal is detached
-
Then disconnect the windshield washer hose and the additional brake light connector.
-
-
-
Pull the black cover towards you
-
Now you can change the bulbs and reassemble in reverse order.
-
Cancel: I did not complete this guide.
One other person completed this guide.
One Comment
Good morning,
And the tutorial for the sw? ;-)
Thanks in advance.
dos-et-les-cafards - Resolved on Release Reply
