-
-
Turn off the ignition
-
Lighting switch in position 0
-
Operate the hood opening control located under the steering wheel on the left side
-
-
-
Open the hood
-
Remove the rubber stopper by pulling on the tab
-
You then have access to the back of the bulb
-
-
-
Turn l'ampoule counterclockwise about 1/8 turn
-
Take out the bulb
-
Replace the bulb with a new HB3 type one
-
It is advisable to replace both bulbs at the same time, as they have the same lifespan.
-
Lock the bulb, 1/8 turn clockwise
-
-
-
Check the correct positioning in the headlight optics
-
Reconnect the electrical connector
-
Replace the protective rubber cap
-
Close the hood
-
Do a test fire lighting.
-
Cancel: I did not complete this guide.
6 other people completed this guide.
7 Comments
A challenge I just completed "alone" without my husband thanks to your tutorial!!!! Thank you again, I'm very proud of myself :)
Marie-Pierre
GUEROUAZEL - Open Reply
It just took me 2 min 30 to change the dipped beam bulb... If Peugeot takes 3 hours I'd like to see!!!!
jeanfi_vincent - Resolved on Release Reply
Hello, especially for daytime running lights or indicators, it's not easy. I changed them to LEDs and it took me all afternoon.
oujda89500 - Resolved on Release Reply
