Introduction
Vehicle engine 1.4 HDi 70 hp
Tools
Parts
-
-
Access to the bulb is from the rear of the fog light.
-
A hatch placed under the bumper allows access to the rear of the light
-
Open the hatch
-
-
-
Disconnect the electrical connector
-
Turn the yellow cover a quarter turn to unlock it.
-
-
-
Disconnect the power wire from the bulb to completely remove the yellow cover
-
Press and then spread outwards the two bulb retaining clips.
-
-
-
Note the shape of the hole before placing the bulb in the headlight.
-
Place the bulb correctly
-
Fold the retaining clips onto the bulb base
-
-
-
Connect the electrical plug to the bulb
-
Place and lock the waterproof cover
-
Reconnect the electrical connector
-
Check for proper operation
-
Cancel: I did not complete this guide.
3 other people completed this guide.
