Introduction
This tutorial will allow you to easily change the bulbs on your vehicle's rear license plate if they no longer work.
Tools
Parts
-
-
Insert the screwdriver into the notch provided and lever to remove the cover.
-
-
-
Locate the bulb circled in red in the image opposite.
-
Remove the bulb using the flat screwdriver (you can also remove the bulb by pulling on it with your fingers).
-
-
-
Insert the bulb into the connectors provided for this purpose.
-
The bulb is changed, you can replace the cover removed in step 1.
-
Cancel: I did not complete this guide.
4 other people completed this guide.
2 Comments
Thank you, it's simple and well explained,)
Thank you, I followed your tutorial!!! Great
