Changing a high beam bulb on a Clio 2

Open the driver's door and pull the release lever towards you.

Reach under the hood and lift the tab.

Once your hood is open, put the safety rod in place so that your hood stays open

Locate the bulb location behind the headlight

Remove the soft cover from the bulb holder

Locate the two metal pins that hold the bulb holder in place.

Push on each pin and spread them apart to release the bulb holder.

Once the pins are out of the way, pull the bulb holder towards you

Remove the old bulb from its holder by simply pulling

Compare the old and new bulb

Reposition the bulb holder in the intended location and replace the pins to lock the bulb holder in position.

Replace the soft cover

Close the hood and test the operation of the new bulb