Changing a dipped beam bulb on a Peugeot Partner

Written By: Nicolas Dajoux (and one other contributor)

Comments: 9
Favorites: 0
Completions: 3

Changing a dipped beam bulb on a Peugeot Partner

Difficulty

Very easy

Steps

Time Required

00:15:00

Tools

No tools specified.

Parts

Tail light bulbs

View

Step 1 Access to the lighthouse

Raise the front hood

Edit

Step 2 Access to the bulb

Remove the rubber cover by pulling the tab backwards

Remove the rubber cover by pulling the tab backwards

Edit

Step 3 unplug the connector

Gently pull the connector straight back to disconnect it

Gently pull the connector straight back to disconnect it

Edit

Step 4

Unclip the bulb by applying light pressure to the top of the clip using a lateral movement.

Swing the clip all the way down to remove the bulb.

Unclip the bulb by applying light pressure to the top of the clip using a lateral movement.
Swing the clip all the way down to remove the bulb.
Compare the new bulb with the old one.

Edit

Step 5 Installing the new bulb

Put la nouvelle ampoule in place with the lug facing upwards

Put la nouvelle ampoule in place with the lug facing upwards
Put the clip back
Replace the electrical connector

Edit

Step 6 Lighthouse closures and control

Replace the bulb cover
Turn on the headlight to check that it is working properly.

Edit

Finish Line

3 other people completed this guide.

Author

with 1 other contributor

Nicolas Dajoux

Member since: 9/13/16

2,016 Reputation

8 Guides authored

7 Comments

Hello, I lost the rubber cover that protects against dust.

Under what reference can I find some?

Thank you!

mariek76 - Feb 3, 2022 Resolved on Release Reply

Hello, I don't have a rubber cover.

pigachelionel - Jan 31, 2021 Resolved on Release Reply

It helped me a lot, thank you!!!

plenitude91 - Nov 9, 2020 Resolved on Release Reply

Hello and thank you very much for your help, best regards

Reda GOUMIDI - Sep 2, 2020 Resolved on Release Reply

Hello, I am looking for someone to tell me how to remove a turn signal bulb on the front of the vehicle because it is very difficult to remove from the location on a Peugeot Partner Tepee. What should be removed? Thank you, it is clearly visible at the engine level...

Stéphane Vancauwelaert - Jun 29, 2020 Resolved on Release Reply