Skip to main content
  1. To make changing the bulb easier, we recommend removing the ceiling light. Insert a small flathead screwdriver into the notch on the driver's side and pry toward the roof Unclip the connection by pressing the lug then removing the plug
    • To make changing the bulb easier, we recommend removing the ceiling light.

    • Insert a small flathead screwdriver into the notch on the driver's side and pry toward the roof

    • Unclip the connection by pressing the lug then removing the plug

  2. Rotate the bulbs counterclockwise and then pull upwards Remove the bulb from its holder and replace it with the new bulb. Remove the bulb from its holder and replace it with the new bulb.
    • Rotate the bulbs counterclockwise and then pull upwards

    • Remove the bulb from its holder and replace it with the new bulb.

  3. Reconnect the connection Check that the bulbs are working properly Check that the bulbs are working properly
    • Reconnect the connection

    • Check that the bulbs are working properly

  4. Replace the ceiling light on the right Then clip it by pressing towards the top left until you hear the click
    • Replace the ceiling light on the right

    • Then clip it by pressing towards the top left until you hear the click

Finish Line

One other person completed this guide.

Félix DELANOE

Member since: 04/23/2016

5,059 Reputation

32 Guides authored

2 Comments

Good evening,

Where can I get the socket that supports the bulb for the map reader, it is missing on my Clio

Sincerely

WULLYAMOZ - Reply

Add Comment

View Statistics:

Past 24 Hours: 7

Past 7 Days: 24

Past 30 Days: 152

All Time: 11,122