Skip to main content
  1. 
To make changing the bulb easier, we recommend removing the ceiling light.

Insert a small flathead screwdriver into the notch on the driver's side and pry toward the roof

Unclip the connection by pressing the lug then removing the plug
    • To make changing the bulb easier, we recommend removing the ceiling light.

    • Insert a small flathead screwdriver into the notch on the driver's side and pry toward the roof

    • Unclip the connection by pressing the lug then removing the plug

  2. 
Rotate the bulbs counterclockwise then pull upwards

Remove the bulb from its holder and replace it with la nouvelle ampoule

Remove the bulb from its holder and replace it with la nouvelle ampoule
    • Rotate the bulbs counterclockwise then pull upwards

    • Remove the bulb from its holder and replace it with la nouvelle ampoule

  3. 
Reconnect the connection

Check that the bulbs are working properly

Check that the bulbs are working properly
    • Reconnect the connection

    • Check that the bulbs are working properly

  4. 
Replace the ceiling light on the right

Then clip it by pressing towards the top left until you hear the click
    • Replace the ceiling light on the right

    • Then clip it by pressing towards the top left until you hear the click

Finish Line

One other person completed this guide.

Félix DELANOE

Member since: 04/23/2016

5,059 Reputation

32 Guides authored

2 Comments

Good evening,

Where can I get the socket that supports the bulb for the map reader, it is missing on my Clio

Sincerely

WULLYAMOZ - Resolved on Release Reply

Super , merci.

philippe larant - Resolved on Release Reply

Add Comment



View Statistics:

Past 24 Hours: 2

Past 7 Days: 11

Past 30 Days: 62

All Time: 11,670