Introduction
Engine of the vehicle Peugeot 307 1.6 HDi FAP 16V 110 hp
Tools
Parts
-
-
Open the hood to access the engine.
-
The sensor is located on the air resonator.
-
-
-
Unscrew the fixing screw using an 8 mm socket.
-
Disconnect the connector with a flat screwdriver.
-
Remove the sensor from its support.
-
-
-
Replace the new sensor in its location.
-
Fix the sensor.
-
Reconnect the connector and check for proper operation.
-
Cancel: I did not complete this guide.
2 other people completed this guide.
One Comment
Hello, I would like to know if the MAP sensor on a 307 2L hdi can be found on the air radiator.
Thank you for answering me
thierry.delauney47 - Resolved on Release Reply
