Skip to main content

Introduction

Vehicle engine 1.4 HDi 70 hp

  1. 
In the engine compartment, the sensor is located above the air filter.

In the engine compartment, the sensor is located above the air filter.

In the engine compartment, the sensor is located above the air filter.
    • In the engine compartment, the sensor is located above the air filter.

  2. 
To use a 10 socket wrench to unscrew the fixing screw.

Pull the sensor gently to remove it from its housing.

Pull the sensor gently to remove it from its housing.
    • To use a 10 socket wrench to unscrew the fixing screw.

    • Pull the sensor gently to remove it from its housing.

  3. 
Disconnect the air fitting on the left of the sensor.

Then unplug the connector on the right.

Then unplug the connector on the right.
    • Disconnect the air fitting on the left of the sensor.

    • Then unplug the connector on the right.

  4. 
Compare the correct sensor match.
    • Compare the correct sensor match.

  5. 
Plug the connector into the sensor.

Connect the air hose.

Put the sensor back in place and secure it with the 10 mm screw.
    • Plug the connector into the sensor.

    • Connect the air hose.

    • Put the sensor back in place and secure it with the 10 mm screw.

Finish Line

3 other people completed this guide.

hemissi-nizar

Member since: 01/16/2017

21,057 Reputation

88 Guides authored

3 Comments

Good morning.

My problem comes from the hose that leaves this sensor.

Where does it plug in?

Thank you for your answers.

scolrado - Reply

Following this tutorial, no particular problem for replacing the sensor

THANKS

abdelkrime nacer - Reply

Removing the air box cover makes it easier and gives you a better view.

Jean Dorr - Reply

Add Comment

View Statistics:

Past 24 Hours: 9

Past 7 Days: 20

Past 30 Days: 109

All Time: 8,007