Skip to main content

Introduction

Vehicle engine 1.4 HDi 70 hp

  1. 
In the engine compartment, the sensor is located above the air filter.

In the engine compartment, the sensor is located above the air filter.

In the engine compartment, the sensor is located above the air filter.
    • In the engine compartment, the sensor is located above the air filter.

  2. 
To use une clé à pipe de 10 to unscrew the fixing screw.

Pull the sensor gently to remove it from its housing.

Pull the sensor gently to remove it from its housing.
    • To use une clé à pipe de 10 to unscrew the fixing screw.

    • Pull the sensor gently to remove it from its housing.

  3. 
Disconnect the air fitting on the left of the sensor.

Then unplug the connector on the right.

Then unplug the connector on the right.
    • Disconnect the air fitting on the left of the sensor.

    • Then unplug the connector on the right.

  4. 
Compare the correct sensor match.
    • Compare the correct sensor match.

  5. 
Plug the connector into le capteur.

Connect the air hose.

Put the sensor back in place and secure it with the 10 mm screw.
    • Plug the connector into le capteur.

    • Connect the air hose.

    • Put the sensor back in place and secure it with the 10 mm screw.

Finish Line

3 other people completed this guide.

hemissi-nizar

Member since: 1/16/17

21,057 Reputation

88 Guides authored

3 Comments

Good morning.

My problem comes from the hose that leaves this sensor.

Where does it plug in?

Thank you for your answers.

scolrado - Resolved on Release Reply

Following this tutorial, no particular problem for replacing the sensor

THANKS

abdelkrime nacer - Resolved on Release Reply

Removing the air box cover makes it easier and gives you a better view.

Jean Dorr - Resolved on Release Reply

Add Comment



View Statistics:

Past 24 Hours: 4

Past 7 Days: 36

Past 30 Days: 172

All Time: 8,645