Change the front position light on Isuzu Dmax

Open the hood, lock it in the open position using the prop

Choose the side where the bulb is to be changed

Locate the position light connector (green circle)

Unscrew it by turning it about 1/8th of a turn.

Then pull back the entire bulb holder (It may be necessary to play slightly in order to dislodge the rubber seal)

Remove the bulb by holding the holder with one hand and then simply pulling the bulb out

Check the compatibility (power - base) with the new bulb (New on the left, old on the right)

Push the new bulb into its housing

Turn on the lights and ensure they are working properly.

Then put it back in its housing by screwing it in about 1/8th of a turn.