Tools
Parts
-
-
Remove the 3 10 mm screws to remove the protective cover.
-
-
-
Remove the 4 Torx screws
-
Disconnect the 2 pipes by pressing the green and yellow button.
-
Lift the lid and if possible empty the diesel fuel inside with a syringe.
-
-
-
Put the new filter and the new gasket as well.
-
Then repeat the reverse procedure for reassembly.
-
Once reassembled, turn on the ignition and you will hear the filter filling with diesel.
-
Then start the vehicle.
-
Cancel: I did not complete this guide.
One other person completed this guide.

