Introduction
Change EGR valve velsatis 2.2 dci
-
-
The engine must be switched off
-
Remove the engine cover(s)
-
Remove the exhaust gas pipes by unscrewing the 4 screws using a 13 mm wrench . Remove the hose
-
Disconnect the 2 connectors
-
-
-
Using the 10 wrench, unscrew the 3 screws to remove the EGR valve
-
Remove the EGR valve
-
Difficult extraction, disassembly can be done in two parts
-
Clean the inside of the EGR valve duct
-
Comparison between old and new EGR valve
-
-
-
Tighten the 3 screws to secure the new EGR valve
-
Correctly position the seal on the EGR valve
-
-
-
Reconnect the 2 connectors
-
Reposition the exhaust pipe (4 screws)
-
Reposition the engine cover(s)
-
In order to avoid greasing your EGR valve, carry out an oil change and change the oil filter before starting the vehicle.
-
Cancel: I did not complete this guide.
5 other people completed this guide.
3 Comments
Good morning,
Is there any training to be done with the suitcase please?
THANKS.
Philippe Bauwens
good tutorial it helped me a lot, thank you.
Thank you very much for these explanations.
