Skip to main content

Tools

No tools specified.

  1. 
Turn on the ignition with the key
    • Turn on the ignition with the key

    • Turn off the ignition and then operate the windshield wiper stalk.

  2. 
Move the latch in the center of the wiper upwards

The wiper shaft is now released on the other side

The wiper shaft is now released on the other side
    • Move the latch in the center of the wiper upwards

    • The wiper shaft is now released on the other side

  3. 
Push the broom upwards to remove it from its support (it is clipped in the center and at both ends)

Push the broom upwards to remove it from its support (it is clipped in the center and at both ends)

Push the broom upwards to remove it from its support (it is clipped in the center and at both ends)
    • Push the broom upwards to remove it from its support (it is clipped in the center and at both ends)

  4. 
Check that le nouveau balai be the same as the old one (length, fixing)

Check that le nouveau balai be the same as the old one (length, fixing)
  5. 
Place the central axis of the new broom on the support

Place the central axis of the new broom on the support

Place the central axis of the new broom on the support
    • Place the central axis of the new broom on the support

  6. 
Clip the 2 ends of the broom onto its support

Lock the latch

Lock the latch
    • Clip the 2 ends of the broom onto its support

    • Lock the latch

Finish Line

4 other people completed this guide.

Willy Landais

Member since: 7/13/16

179 Reputation

1 Guide authored

2 Comments

Hello, I received the message, I'm going to see my son-in-law at the suitcase,

If it doesn't work I'll send you a message.

Thank you very much Patrick ECKERT

Patrick Eckert - Resolved on Release Reply

Trop top !!! Merci beaucoup, très efficace.

Gourvenec Nathalie - Resolved on Release Reply

Add Comment



View Statistics:

Past 24 Hours: 0

Past 7 Days: 9

Past 30 Days: 43

All Time: 7,075