Introduction
This tutorial is about changing the heating or air conditioning fan on Alfa Romeo 156 1.9 JTD 110cv
Tools
Parts
-
-
Tools Preparation 1 Allen key (in red), 1 10 socket with an extension (in blue), 1 small flat screwdriver (in yellow), 1 5.5 socket with a small extension (in green). Or 1 set of case
-
The air blower is located on the passenger side behind and below the glove box (see blue arrows)
-
-
-
Disconnect the plug using the flat screwdriver by pressing the tab
-
Compare the 2 air blowers (3rd photo: The new one circled in blue, the old one in red)
-
Diameter [mm]: 150 Vehicle equipment: for vehicles with air conditioning system Power consumption [W]: 200 Operating speed [1/min.]: 3500 Direction of rotation: Anti-clockwise rotation Voltage [V]: 12 For left-hand drive vehicles
-
Cancel: I did not complete this guide.
One other person completed this guide.
2 Comments
Usefulness of doing this?? “Remove the calculator protection using the 10 socket (see 2nd photo) and the Allen key (circled in blue)”
Hello. Possible HS when no more air conditioning and heating (dashboard light no problem I have the temperatures displayed) it lights up etc. But no noise heating or air conditioning (only the click of putting the air conditioning on) and I previously had water in the passenger carpet and carpet under the fan to wet. Thank you very much if thanks to your tutorial it came from that!! (Alfa 147 but it's the same) I also have a Giulieta but after that I will not take any more Alfa. The new models are not given.. Giulia Stelvio etc.. and changing is good too. Alfa Romeo is not easy the mechanics on it compared to Peugeot Renault/Dacia etc. Even if I know it like the back of my hand now.