Replacing the diesel filter on Berlingo 2

Locate the position of the fuel filter

To remove the first hose, lift the ring with a screwdriver. Then pinch on each side and remove the hose.

For the next two, press the rings with the screwdriver and carefully remove the hoses.

To remove the sensor plug, push the tab using a flathead screwdriver and unplug the plug at the same time.

Unscrew the 2 fixing screws using an 8 mm wrench.

Remove the 3 Torx screws

Then turn the central handle clockwise.

Remove the filter from the upper part

Compare filters to ensure the type and dimensions are the same.

Snap the filter under the top part, turn the handle counterclockwise. Replace the 3 screws.

Replace the filter and filter holder, making sure to place the rod correctly in the hole at the bottom.

Tighten the two fixing screws.

Replace and lock the hoses.

Pump until the button hardens. Start the vehicle.

You are done