Tools
Parts
-
-
The cabin filter is located at the front right of the engine hood, under the windshield
-
Using a small flat screwdriver, pull on the upper part of the 4 plastic clips to unlock them, then remove them from their housing.
-
Once the clips are out, remove the cover
-
-
-
Remove the filter from its location
-
Compare the dimensions between the old and new cabin filter (length, width)
-
-
-
Insert the new cabin filter in the housing rails,The arrows on the side of the filter indicate the direction of reassembly of the filter
-
Proceed to reassembly in the reverse order by repositioning the cover and replacing the cover with the clips
-
Cancel: I did not complete this guide.
15 other people completed this guide.
11 Comments
Hello I have the same problem I can't find it
Hello, what is the direction of the arrow on your filter? Up or down?
The arrow was erased on the vehicle I just bought.
Hello
excellent this one!!!
THANKS!!!
Hello Florent and Morgane, did you get an answer for the cover that is falling apart?
It's getting urgent, mine is almost useless anymore. Is it unavailable, in fact?
Thank you all for your answers.
simple and complete tutorial. Also valid for 308 petrol