Skip to main content

Introduction

Replacing the air filter on the Fiat Ducato 2.8l TDI Maxi Power 137CV engine

  1. 
You must first remove the 4 screws that hold the filter cover: 2 in front and 2 behind

You must first remove the 4 screws that hold the filter cover: 2 in front and 2 behind
    • You must first remove the 4 screws that hold the filter cover: 2 in front and 2 behind

  2. 
Lift the hood and remove the filter by lifting and tilting. You can vacuum the filter holder lightly to remove any dirt.

Lift the hood and remove the filter by lifting and tilting. You can vacuum the filter holder lightly to remove any dirt.
    • Lift the hood and remove the filter by lifting and tilting. You can vacuum the filter holder lightly to remove any dirt.

  3. 
Do the reverse operation: tilt the filter and position it correctly in its notch.

Do the reverse operation: tilt the filter and position it correctly in its notch.

Do the reverse operation: tilt the filter and position it correctly in its notch.
    • Do the reverse operation: tilt the filter and position it correctly in its notch.

  4. 
Remember to screw in a cross pattern so as not to crush the filter on one side only.

Remember to screw in a cross pattern so as not to crush the filter on one side only.
    • Remember to screw in a cross pattern so as not to crush the filter on one side only.

Finish Line

One other person completed this guide.

jean luc dereclenne

Member since: 6/28/18

1 Reputation

1 Guide authored

2 Comments

Finally I looked into it and there is just not the screw but 3 hooks, otherwise same practical as yours.

Bourre - Resolved on Release Reply

Hello and thank you for the tutorial 👍

Do you know if this tutorial would be suitable for a 2001 Fiat Ducato please?

Bourre - Resolved on Release Reply

Add Comment



View Statistics:

Past 24 Hours: 1

Past 7 Days: 7

Past 30 Days: 40

All Time: 2,851