Difficulty
Easy
Steps
4
Time Required
00:05:00
Ce tutoriel a été créé par la communauté
User contributed
Introduction
This intervention is carried out on a Peugeot 306 phase 3 petrol 1.8 16V 112ch
Parts
-
-
Air inlet hose
-
Remove the screw with a 10mm socket.
-
Pull the hose out slightly to make it easier to access the filter housing screw.
-
-
-
Using a Phillips screwdriver, unscrew the 7 screws.
-
Lift the cover.
-
Remove the filter.
-
Use a vacuum cleaner to remove all dust from the housing.
-
-
-
Old filter
-
New filter -
The old filter had a foam pre-filter.
-
Reassembly is carried out in reverse order.
-
Cancel: I did not complete this guide.
2 other people completed this guide.
