Introduction
Here's how to replace an air filter on a Peugeot 106 1.0 i 50cv
Tools
Parts
-
-
Open the hood under the steering wheel to access the engine compartment.
-
Locate the filter
-
-
-
Unscrew the clamps with un tournevis plat
-
1 collar on the carburetor on the left
This is the same photo twice. It is the carburetor collar and not the air box in the photo on the right with the screwdriver.
JP DE SCHEPPER - Resolved on Release Reply
-
-
-
Remove the 2 air intake tubes on the right side of the manifold
-
-
-
Lift the collector on each side
-
Rotate the manifold to access the air filter
Good morning ,
Excuse me for bothering you, can I have the name of the green pipe please?
celiaclausse130819 - Resolved on Release Reply
-
-
-
Remove the 2 clips by pulling them upwards and outwards
-
Turn the entire filter assembly slightly clockwise to remove it from the tabs
-
Pull the air filter cover upwards and remove the filter
-
Clean the air filter box
-
-
-
Check the correspondence between the old and le nouveau filtre à air
-
-
-
Check that the seal is not left on the air box
-
Insert the new gasket into the groove of the new filter
-
Use a flathead screwdriver to place the gasket into the bottom of the groove
-
-
-
Reassemble the filter in the air box by aligning the lugs
-
Turn counterclockwise
-
Put the 2 clips back
-
-
-
Reassemble the collector
-
Replace the 2 air intakes
-
Screw the 2 collars back on
-
Cancel: I did not complete this guide.
10 other people completed this guide.
6 Comments
At the top, great tutorial, the clearest I found on the net! Simple and effective, it's really good that Oscaro offers this type of tutorial! Thank you!
Cécile Lanne - Resolved on Release Reply