Difficulty
Very easy
Steps
4
Time Required
00:10:00
Tutoriel complet
Ce tutoriel contribué par la communauté est complet et prêt pour l'examen de l'équipe Oscaro.
Ce tutoriel a été créé par la communauté
User contributed
Introduction
Replacing a used air filter with a new air filter
-
-
The air filter unit containing the air filter to be replaced is located at the front in the engine compartment on the passenger side.
-
-
-
The block cover is held in place by 4 Torx T 25 head screws (one at the front, one at the rear and two on the driver's side) and by a system of 3 notches on the passenger side.
-
Unscrew the 4 screws one after the other.
-
Tilt the hood toward the passenger side to disengage the 3 notches
-
-
-
Remove the used filter
-
Vacuum up the items at the bottom of the block
-
Place the new filter in its housing
-
-
-
Reposition the hood above its location
-
Tilt the hood to engage the three notches
-
Tighten the 4 screws
-
Cancel: I did not complete this guide.
7 other people completed this guide.
3 Comments
super facile merci
toppazze06 - Resolved on Release Reply
Very useful! When will there be a tutorial on replacing spark plugs!
THANK YOU Nguyen Ph
phuc.hung67 - Resolved on Release Reply
Hello and well done, it's childishly clear, thank you.
Thierry Karekinian - Resolved on Release Reply
