Difficulty
Easy
Steps
3
Time Required
00:10:00
Tutoriel complet
Ce tutoriel contribué par la communauté est complet et prêt pour l'examen de l'équipe Oscaro.
Ce tutoriel a été créé par la communauté
User contributed
Introduction
This tutorial helps you to change the air filter on C3 Picasso 1.4L VTI 95CV
Parts
-
-
Bring the vehicle documentation and the tools needed for the operation, without forgetting the protective equipment (goggles, gloves, etc.).
-
-
-
Unscrew the seven torx screws (red) as well as the 10 bolt (blue).
-
Clean the filter housing.
-
Compare the match of the two filters.
-
Cancel: I did not complete this guide.
3 other people completed this guide.
4 Comments
it's exactly the same filter that is in 208 1 with a 1.6 vti. good tutorial
stefantineke - Resolved on Release Reply
Hello to all Citroën fans.
Indeed I noticed that the air filter cover installed reveals the air filter on the left side. Which means that the cover is no longer airtight and lets air in (therefore too much air for the engine). I noticed that the filter I bought from Citroën is 2 mm higher!!!. My C3 dates from March 2015. It is the 1.6 VTI petrol engine of 120 hp DIN EN 4 cylinders obviously. Be careful, there is no point in insisting on screwing the plastic filter cover back on. There is a risk of damaging the thread!!!
THANK YOU FOR YOUR ADVICE
Claude Karch
Claude KARCH - Resolved on Release Reply
Good morning,
I just reassembled with a new filter. but we can slightly see the filter seal on the left part of the air box as if it closed badly. Do you think this is normal?
julien Goslini - Resolved on Release Reply
