Introduction
This tutorial explains how to change the air filter on Polo 4 1.4 TDi 68cv
Tools
Parts
-
-
Remove the 2 small Phillips screws on the far right.
-
Pull back the case which is held by 2 small plastic clips (circled in red). You will see better what they look like in photo 3.
-
-
-
As the housing is no longer fixed to its support, lift it and remove the filter,
-
PS: you will notice that I left the flow meter and its supercharging hose connected to the housing, this does not in any way hinder the fact that we can lift the housing to remove the filter.
-
Compare the dimensions and shape between the old and new air filter
-
Clean the air box with a blower to remove any impurities present inside.
-
-
-
Replace the air filter in its location then replace the housing.
-
First, you need to fit the small gutter surrounded at the very bottom onto the edges of the filter, then push the 2 clips into their location.
-
Tighten the 2 Phillips screws on the right side
-
Cancel: I did not complete this guide.
7 other people completed this guide.
