Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

Replacing dipped headlight bulbs on Peugeot 607

Written By: Quentin Hubert (and one other contributor)
  • Comments: 2
  • Favorites: 0
  • Completions: 2

Difficulty

Easy

Steps

12

Time Required

00:15:00

Sections

1

Flags

0

Introduction

Guide to replacing a H7 type front right dipped beam headlight bulb on Peugeot 607 phase 1 (2001 - 2004)

  1. check that your lights are off Turn the screws 1/2 turn to release them Use a screwdriver to lever the plastic clips.

    • check that your lights are off

    • Turn the screws 1/2 turn to release them

    • Use a screwdriver to lever the plastic clips.

    Edit

  2. Unscrew the plastic clip 1/2 turn to release it Remove the side plastic cover. Be careful not to lose the screws. Remove the side plastic cover. Be careful not to lose the screws.

    • Unscrew the plastic clip 1/2 turn to release it

    • Remove the side plastic cover. Be careful not to lose the screws.

    Edit

  3. Lift the fuse box cover to unclip it Lift the fuse box cover to unclip it Lift the fuse box cover to unclip it

    • Lift the fuse box cover to unclip it

    Edit

  4. Unscrew the cap behind the headlight lens by 1/4 turn. Unscrew the cap behind the headlight lens by 1/4 turn. Unscrew the cap behind the headlight lens by 1/4 turn.

    • Unscrew the cap behind the headlight lens by 1/4 turn.

    Edit

  5. Pull the connector to disconnect it Pull the connector to disconnect it Pull the connector to disconnect it

    • Pull the connector to disconnect it

    Edit

  6. Unclip the bulb retaining clip by pushing and move it to the right to release the bulb retainer. Rotate the clip downwards Unclip the bulb retaining clip by pushing and move it to the right to release the bulb retainer. Rotate the clip downwards Unclip the bulb retaining clip by pushing and move it to the right to release the bulb retainer. Rotate the clip downwards

    • Unclip the bulb retaining clip by pushing and move it to the right to release the bulb retainer. Rotate the clip downwards

    Edit

  7. Compare the new bulb with the used one Do not touch the glass of halogen bulbs, this degrades their quality

    • Compare the new bulb with the used one

    • Do not touch the glass of halogen bulbs, this degrades their quality

    Edit

  8. Insert the new bulb into the optical unit Fold the clip upwards to secure the bulb Fold the clip upwards to secure the bulb

    • Insert the new bulb into the optical unit

    • Fold the clip upwards to secure the bulb

    Edit

  9. Reconnect the connector Screw the cap back on Screw the cap back on

    • Reconnect the connector

    • Screw the cap back on

    Edit

  10. Replace the plastic cover of the fuse box. Clip the 2 notches (one on the left and one on the right) Replace the plastic cover of the fuse box. Clip the 2 notches (one on the left and one on the right) Replace the plastic cover of the fuse box. Clip the 2 notches (one on the left and one on the right)

    • Replace the plastic cover of the fuse box. Clip the 2 notches (one on the left and one on the right)

    Edit

  11. Tighten the 2 screws 1/2 turn Press the plastic clip to lock it Press the plastic clip to lock it

    • Tighten the 2 screws 1/2 turn

    • Press the plastic clip to lock it

    Edit

  12. Press then turn the plastic screw 1/2 turn Test the operation of your dipped headlights

    • Press then turn the plastic screw 1/2 turn

    • Test the operation of your dipped headlights

    Edit
Finish Line

2 other people completed this guide.

Author

with 1 other contributor

Quentin Hubert

Member since: 4/2/16

842 Reputation

7 Guides authored

One Comment

THANKS

It's the left headlight, not the right one.

It may be necessary to specify to orient the bulb with the flat part + nipple upwards when installing it.

Henri DAWIDOWICZ - Resolved on Release Reply

Add Comment



View Statistics:

Past 24 Hours: 0

Past 7 Days: 15

Past 30 Days: 48

All Time: 9,636

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.