Difficulty
Very easy
Steps
5
Time Required
00:15:00
- Replacing a tailgate cylinder 5 steps
Ce tutoriel a été créé par la communauté
User contributed
Introduction
Intervention carried out on a Ford Fiesta IV phase 2 1.3 60ch from 2002
Tools
Parts
-
-
Place a small flathead screwdriver behind the clip and remove it.
-
Leave the jack head in its housing otherwise the trunk will close on you.
-
-
-
With one hand hold the tailgate and with the other remove the clip.
-
While holding the tailgate, remove the head of the passenger compartment side jack
-
then tailgate side
-
-
-
Reassembly is carried out in reverse order.
-
The new cylinder is a TRISCAN. I did not know this brand, I will not buy again. There is an oil leak, probably the seal is in poor condition.
-
Cancel: I did not complete this guide.
One other person completed this guide.
