Tools
No tools specified.
Parts
-
-
Remove the retaining clips by rotating them towards the outside of the headlight.
-
Tilt the top of the cover backwards and remove it by sliding it upwards.
-
-
-
Unclip the bulb by applying light pressure to the top of the clip using a lateral movement.
-
Swing the clip all the way down to remove the bulb.
-
Compare the new bulb with the old one.
-
-
-
Place the new bulb in place with the tab facing upwards.
-
Put the clip back
-
Replace the electrical connector
-
-
-
Position the bottom of the cover in the two notches, then tilt the top of the cover against the headlight.
-
Replace the retaining clips.
-
Turn on the headlight to check that it is working properly.
-
Cancel: I did not complete this guide.
18 other people completed this guide.
4 Comments
Impeccable et excellentes
explications précises et photos parfaites…
Perfect!! Thank you very much!
Very well explained and great photos!!