Replacement glow plugs Punto 1.3JTD

Written By: charly bontemps (and one other contributor)

Comments: 1
Favorites: 0
Completions: 4

Difficulty

Moderate

Steps

Time Required

00:45:00

Tools

Pawl

petit

View

Parts

Glow plug

View

Step 1 Replacement glow plugs Punto 1.3JTD

Insert comment.

Edit

Step 2

Disconnect the air inlet by pressing the 2 lugs

Disassemble the flow meter by unscrewing the 2 screws of 10

Open the hood
Disconnect the air inlet by pressing the 2 lugs
Disassemble the flow meter by unscrewing the 2 screws of 10
Remove the air filter housing by pulling upwards and then towards you.

Edit

Step 3

Pull the spark plug sockets to disconnect them.

Replace the candles one by one, taking care to grease the thread and to grip the thread well by hand

DO NOT USE FORCE WHEN DISASSEMBLING OR ASSEMBLING

Pull the spark plug sockets to disconnect them.
Replace the candles one by one, taking care to grease the thread and to grip the thread well by hand
DO NOT USE FORCE WHEN DISASSEMBLING OR ASSEMBLING
Reassemble the elements in the reverse order of disassembly.

Edit

Finish Line

4 other people completed this guide.

Author

with 1 other contributor

charly bontemps

Member since: 11/22/2016

13,501 Reputation

49 Guides authored

One Comment

Always disassemble the engine when HOT to avoid spark plug breakage and thoroughly clean any dirt around the spark plugs with a blower before starting the operation.

Bernard PARISOT - Feb 24, 2019 Resolved on Release Reply