Skip to main content

Introduction

This tutorial shows you the steps to change the rear trailing arm of your BMW. The model shown is a 330d E91 phase 1

  1. 
It connects the rocket to the chassis.

It connects the rocket to the chassis.
    • It connects the rocket to the chassis.

  2. 
Using an 18mm wrench, unscrew the bolt.

Using an 18mm wrench, unscrew the bolt.
    • Using an 18mm wrench, unscrew the bolt.

  3. 
Take two 18mm keys.
    • Take two 18mm keys.

    • Use the first to unscrew the bolt and the second to lock the nut.

  4. 
Raise the arm on the rocket side then pull, it should come out without forcing.
    • Raise the arm on the rocket side then pull, it should come out without forcing.

  5. 
Reassembly is carried out in reverse order.

Reassembly is carried out in reverse order.
    • Reassembly is carried out in reverse order.

Finish Line

2 other people completed this guide.

laurent.immo13003

Member since: 03/03/2016

12,942 Reputation

155 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 8

Past 30 Days: 21

All Time: 1,254