Difficulty
Easy
Steps
4
Time Required
00:20:00
Ce tutoriel a été créé par la communauté
User contributed
-
-
Unclip the glove box door from its housing
-
Location of Torx screws
-
Remove the glove box from its housing
-
-
-
Replace the new resistor
-
Tighten the screw with the 5 mm socket
-
Cancel: I did not complete this guide.
One other person completed this guide.
6 Comments
Hello to you, my parents have an Opel Corsa D 75 hp from 2011.
My problem is that there is no more ventilation inside the vehicle with the ignition and engine on. I have nothing at all coming out, neither hot air nor cold air. I tried the 4 gear positions and nothing works.
Good morning,
I have exactly the same problem as you, no air at all coming out of the grids.
did you do the repairs?
For me it's the engine that needs changing.
I just bought the car and I haven't looked for the fault yet.
Hello, I have a notched half wheel that fell at my feet on the driver's side. I no longer have hot air and sometimes no air at all to work. What should I do, cordially?
Hello, my car no longer gives off heat from the ventilation. Could it be the resistor that is faulty?
Hello Mohammed, first check if your heating valve axle is not broken (this is the problem on automatic air conditioning models) it is located on the driver's side, you just have to unclip the plastic air vent and just above there is a small motor that you have to unscrew and you have to look at the axle of the half-toothed wheel if it is not broken.
Good luck
