Logo l'atelier Oscaro, la mécanique à portée de clic Logo Oscaro

Oil change and oil filter on Ford Ka II - 1.2i 69ch

Written By: arnaud.janssen (and 2 other contributors)
  • Comments: 5
  • Favorites: 0
  • Completions: 3

Difficulty

Easy

Steps

6

Time Required

00:30:00 - 00:45:00

Sections

1

Flags

1

Ce tutoriel a été créé par la communauté

Ce tutoriel a été créé par la communauté

User contributed

Introduction

tutorials made on Ford Ka 2009 1.2 69 CV

Oil change in 5w40 standard C3 (manufacturer's recommendation) with replacement of the oil filter

  1. Opening the engine hood 3 Liters of 5w40 oil standard C3 + Bosh P2041 oil filter

    • Opening the engine hood

    • 3 Liters of 5w40 oil standard C3 + Bosh P2041 oil filter

    Edit

  2. Locating the drain plug I use a 10mm allen key Unscrew the drain plug, the oil flows out.

    • Locating the drain plug

    • I use a 10mm allen key

    • Unscrew the drain plug, the oil flows out.

    Edit

  3. Locating the oil filter and loosening it using a strap wrench to unblock it Removing the old filter Removing the old filter

    • Locating the oil filter and loosening it using a strap wrench to unblock it

    • Removing the old filter

    Edit

  4. Well oil the new gasket for better sealing Refit the new filter, tightening only by hand to avoid any problems during the next oil change Replacing the drain plug with its copper seal

    • Well oil the new gasket for better sealing

    • Refit the new filter, tightening only by hand to avoid any problems during the next oil change

    • Replacing the drain plug with its copper seal

    Edit

  5. Remove the filler cap Add 2.8 liters of oil Check the level using the oil dipstick

    • Remove the filler cap

    • Add 2.8 liters of oil

    • Check the level using the oil dipstick

    Edit

  6. Let the engine idle until the circuit is ready. Turn off the ignition, leave for 30 minutes and check the level, then top up if necessary.

    • Let the engine idle until the circuit is ready. Turn off the ignition, leave for 30 minutes and check the level, then top up if necessary.

    Edit
Finish Line

3 other people completed this guide.

Author

with 2 other contributors

arnaud.janssen

Member since: 04/20/2018

2,357 Reputation

36 Guides authored

4 Comments

Hello sorry to ask the same question

But can you give me the diameters of the plug and the drain seal because in a comment you say 16 but in the photo we see 16.7

What are the diameters please :)

lesquate04 - Reply

Good morning,

Is this the original cap with seal? On the Fiat 500 (same engine), it is a conical cap without seal and opens with a BTR of 12.

oliv95100 - Reply

Hello, what size gasket should I use please?

sabrina michel - Reply

Hello, the gasket used is 16x22x1.5

arnaud.janssen -

Add Comment

View Statistics:

Past 24 Hours: 6

Past 7 Days: 39

Past 30 Days: 146

All Time: 10,892

Oscaro.com   © 2024 Oscaro.com Tous droits reservés.