Video Overview
-
-
lever le véhicule : Securing the vehicle: removing and refitting the wheel
-
Visualize the crankcase, position a tray under the crankcase
-
Using a ratchet and a number 21 socket, loosen the crankcase plug.
-
-
-
Compare the old and new crankcase plug
-
When the oil has completely drained, replace the new plug on the crankcase.
-
Clean the crankcase with a cloth
-
-
-
Lower the vehicle to the ground
-
Using the T 25 tip, remove the paste by unscrewing the 2 screws
-
Unclip and remove the hose
-
Once the hose is removed the oil filter is accessible
-
-
-
Place a pan under the vehicle below the oil filter
-
Using the 27 socket and a ratchet, loosen the oil filter and then remove the filter.
-
Remove the oil filter from the cap, clean the cap and compare the old and new oil filter (diameter, length)
-
Reposition the oil filter
-
-
-
Remove the old gasket from the bell and replace it with the new one
-
Screw the bell back on by hand then tighten with the socket and ratchet
-
Spray with brake cleaner
-
-
-
Pour 3 to 3.5 liters of oil
-
Perform a first dipstick to check the oil level
-
Add 1.5 liters then measure a second time
-
Run the engine for a minute and do a final gauge (the level should not reach the maximum but 2 millimeters below)
-
Fill in the label (mileage, date of oil change , type of oil, next oil change in 15,000 km) and place it in a dry place.
-
Cancel: I did not complete this guide.
5 other people completed this guide.
One Comment
Beautiful, precise photos and everything is clear in the explanations. Oil change was successful for me!!! Thanks to the author.